Rubber Stone Play Surface Maintenance Guide

Rubber Stone Play Surface Maintenance Guide

Rubber Stone™ Play Surfaces Maintenance Guide

Rubber Stone™ Play Surfaces are high caliber systems designed to deliver superior performance under the most demanding of circumstances. In order to extend the life of your system, reasonable care and maintenance must be provided. Standard required procedures are as follows:

Cleaning 

  1. Avoid using a broom.
  2. For occasional cleaning, use a blower or water hose.
  3. Cleaners must have a neutral pH and be approved for use.
  4. Once a year, pressure wash the surface. 2000 – 4,000 PSI are recommended.
DO NOT exceed 4,000 PSI. Maintain a distance of 6” or more from the surface.
  1. Use only potable and mineral-free water.
  2. Wipe up all spills immediately.
  3. Consult Rubber Stone™ before initial cleaning. 

Equipment 

  1. Equipment must be lifted or carried over the play surface; never drag anything over the surface. Use crossing mats to protect the surface when moving equipment.

Foot Traffic 

  1. Do not allow spiked shoes or other sharp objects on the play surface.

Vehicular Traffic 

  1. Limit to lightweight mowers and lightweight maintenance equipment.
  2. Mowers must be operated at maximum height.
  3. All equipment must cross on paths protected by plywood.
  4. Before entering the play surface area, inspect vehicles for leaks. Avoid spillage of oil, fuel, or other fluids.
  5. Do not turn steering wheel while vehicle is at a standstill.
  6. Avoid lurching starts.
  7. Avoid forceful use of the brakes.

Vegetation 

  1. Ensure that no chemicals such as herbicides or fertilizers come in contact with the play surface. Rinse any areas of accidental contact immediately with water.
  2. Maintain a 6” vegetation-free zone around the play surface at all times. A water-soluble herbicide such as glyphosate may be used. Do not spray the play surface.
Do not use weed eaters near the play surfaces.

Insects 

  1. If infestations of ants or other insects become apparent, a powder insecticide may be used. Consult Rubber Stone™ for approval.

Other

  1. Do not allow pets or wheeled vehicles such as bikes or strollers on the play surface.
  2. Never store equipment or other items on the play surface.
  3. Never allow items of significant weight to sit on the play surface.
  4. Distribute the weight of heavy point loads as evenly as possible.
  5. In extremely hot weather, use extra care to protect your play surface. Extreme heat can soften rubber surfaces and make them susceptible to damage from heavy weights.
Misting with water on hot days is recommended.
Follow the above guidelines to extend the life of your Rubber Stone™ Play Surface. Failure to do so may void any warranty associated with the product. If you have any questions, please contact Rubber Stone™ at 1-888-799-3960 or info@rubberstone.ca.
LIMITED WARRANTY NOTICE: This information is based on E.W. Industries Ltd’s present knowledge and experience. E.W. Industries Ltd. assumes no liability for such information and advice. E.W. INDUSTRIES LTD WILL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES (INCLUDING LOSS OF PROFITS) OF ANY KIND. E.W. Industries Ltd. reserves the right to make any changes as required.






    • Related Articles

    • Rubber Stone Mats Maintenance Guide

      Rubber Stone Mats Cleaning & Maintenance Typically, RUBBER STONE MATS require less maintenance than other types of flooring. Vacuuming then damp mopping is the preferred method; very little or no detergent is necessary. Change water frequently. Use a ...

    • Rubber Stone Pools Maintenance Guide (Updated BE0219 ^0 BR0319)

      Maintaining your Rubber Stone Porous Pool Surface Rubber Stone & other porous pool, deck, and spray park overlays are top quality investments that will bring years of enjoyment to those who use them. As with all things of value, it is worth the ...

    • Rubber Stone General Care & Maintenance (Updated March 2019)

      General Care & Routine Maintenance Rubber Stone surfacing has many benefits when installed correctly, and we want you to be able to take advantage of those benefits as long as you own the product. However, that means you need to keep your Rubber ...

    • Rubber Stone Quick Sheet Installation Manual

      Surface Preparation Step 1 - Prepare the substrate-must be clean and dry. Regular Concrete Pressure wash with at least 3000 psi to remove dirt and debris. Sealed Surfaces For going over sealed surfaces like fresh/sealed stamped concrete, sealed or ...

    • Playground Base Binder SDS

      See attachment for pdf file.